Dirty Porcelain Tiles? Protect them with FILASTOP DIRT

protezione-antisporco-gres-strutturato-FILASTOP-DIRTIn this post we will see how to solve the problem of a dirty porcelain tile floor.

Porcelain tiles are one of the materials most used for floors and wall coverings in modern homes, suffice to think of the beautiful floors in wood-effect porcelain tiles or those that reproduce natural stone or terracotta. The success of this material is probably due to the lower laying and treatment costs compared to wooden floors or those in natural stone.

But is it really true that a material like this does not require any kind of maintenance? Despite being considered less delicate than parquet or marble flooring, porcelain tiles, especially textured ones, have a tendency to dirty. Let’s take a look at some useful tips for protecting textured porcelain tiles from dirt and making subsequent cleaning easy.

The surface of this material is very uneven and, precisely because of this, dirt accumulates easily and is not completely removed by normal washing. Result? The floor always looks slightly dirty and stains easily.

filastop-dirt-prodottoTo protect your porcelain tile floor from dirt, you can apply FILASTOP DIRT, the protective barrier against dirt that FILA has conceived specifically for all kinds of textured and unglazed porcelain tiles.

FILASTOP DIRT binds chemically to the material, without creating any kind of surface film and stops dirt from accumulating, making subsequent cleaning and maintenance easier.

 

How to apply FILASTOP DIRT

For application of the product, you can watch this simple video tutorial:

 

Or follow these instructions:

APPLICATION AFTER LAYING ON NEW SURFACES:

1. Wash the floor thoroughly with DETERDEK (concrete grouting) or FILACR10 (epoxy grouting).
2. Apply FILASTOP DIRT to clean dry floor and grouting, covering evenly with a paintbrush, sponge or fleece applicator pad.
3. Rub the surface with a cloth or single-brush machine with white disc.
4. Remove any residue within 10 minutes using a clean cloth or single-brush machine with white disc. We recommend applying the product to 2/3 m² at a time.
5. The surface can be walked on after 12 hours.

 

APPLICATION ON UNTREATED SURFACES TO BE RESTORED TO THEIR ORIGINAL APPEARANCE:

1. Wash the floor with FILAPS87 and/or DETERDEK.
2. Apply FILASTOP DIRT to clean dry floor, following the instructions above.
ADVICE: in the case of stubborn residues, rub the surface with a cloth soaked in the product until they are completely removed.
WARNING: It may enhance the colour of the material or grouting; carry out a spot test beforehand. Solvent-based product; when used indoors, air the room during application.

 

Do you need other technical advice? Ask the FILA experts!

 

Facebook
Twitter
LinkedIn
Pinterest
WhatsApp

Subscribe to the newsletter

and stay up-to-date on all FILA news

Popular Articles

9 Comments

Comment this article

9 Replies to “Dirty Porcelain Tiles? Protect them with FILASTOP DIRT”

  1. I have 2 bathrooms and have installed light porcelain tile floors with a matte finish. They show dirt very easily and the grout is dirty, and it’s only been 3 months since installation. It’s partially my fault for buying a lighter color, but will the Fila products help?

    1. Hi Sarah F., our technical support has contacted you via email to help you find the best treatment.
      Kind Regards
      Jennifer

  2. I just had porcelain tiles around my pool area. The tiles have texture and it gets dirty very easily. To remove the dirt is a real pain. Will the FILASTOP dirt help?

    1. Hi Jose A., our technical support has contacted you via email to help you find the best treatment.
      Kind Regards
      Jennifer

  3. I would like to protect my outdoor porcelain tiles from engrained dirt. Right now they always look dirty. Will FILASTOP Dirt help? Where can I buy this product. I live in Niagara-on-the-Lake, Ontario, Canada. I need to cover about 600 sq ft.

    1. Hi Michael, our technical support has contacted you via email to help you find the best treatment.
      Kind Regards
      Laura

    1. Hi John,
      One coat is enough to protect the porcelain tile surface and joints. The most important thing is to follow with precision the application instructions on the label.

    Having read the Information Notice on the processing of data:
    • To receive marketing activities

    • To profiling activities

    By clicking send button, I confirm that I request the service indicated in point a) of these guidelines; my consent to the processing of data for the purposes of the service, including the processing methods mentioned in these guidelines, including possible processing carried out in EU member states or non-EU countries.

    Related articles

    Previous
    Next

    Fila Industria Chimica Spa

    Paid-in Capital: 35018

    Registered Office: VIA GARIBALDI, 58
    Administrative Office: Via Garibaldi, 58 – 35018 San Martino di Lupari (PD) – Italy
    Rea: PD-45734

    Company Profile PD 45734