How should porcelain tiles be cleaned? Stains and marks on porcelain tiles? Answers to all your questions

Very often, we receive questions about cleaning porcelain tile floors. This material, used more and more frequently in our homes as it is considered to be very resistant and easy to care for, actually often shows problematical stains and marks against the light that will not go, even after very frequent washing.
In this article, we have put together the most frequent questions and relative answers about cleaning porcelain tiles.

PROBLEMS WHEN CLEANING WOOD-EFFECT PORCELAIN TILES

stain-porcelain-tiles

TIZIANA WRITES: Hi, I have a floor in wood-effect porcelain tiles, laid 2 years ago. This floor currently looks very rough against the light, with marks that look like dirt… could you advise what product I should use? Thanks in advance

FRANCESCO WRITES: Good evening, after my floor in wood-effect porcelain tiles was laid I followed the manufacturer’s instructions for initial cleaning, but not long after I now always have the same problem with annoying stains against the light and as soon as we walk on it you can see all the footprints. Each time I wash it the problem seems to disappear, but after just a few hours, when the floor is perfectly dry, it returns.

SIMONA WRITES: Hi, I have a floor in wood-effect porcelain tiles. My problem is that when I go to wash the floor, footprints appear. Once it’s dry they disappear but you can see them against the light and the marks stay. I have used lots of different products but can’t seem to solve this problem. Now I only wash the floor with water. After the floor was laid, the installer washed it with hydrochloric acid diluted 50% in water. Did he do the right thing or was this the cause of my problem?

MARIA PIA WRITES: Good morning. I have a floor in fabric-effect porcelain tiles that we basically can’t walk on!!! If my children walk on it barefoot, that’s it…. is there a detergent that gives a minimum protection?
Thanks a lot

SOLUTION: WASH WITH DETERDEK DETERGENT OR FILAPS87 DEGREASER

MARKS-PORCELAIN-TILES

Stains and marks seen against the light on a porcelain tile floor are usually caused by residues that accumulate on the surface, which may have one of 2 origins:
Laying residues that have never been correctly removed and which form an invisible patina on the surface that is invisible to the naked eye, but which holds onto dirt. In this case, you need to wash thoroughly with specific DETERDEK PRO detergent. This is most likely the cause if the floor is new and has had this problem of marks since it was laid.
• Or residues due to “polishing” effect maintenance products that leave waxy substances on the floor, which, over time, create a sensitive layer. In this case, you should use PS87 PRO degreaser. This situation is most likely to occur on a floor that is not new, laid years previously, where the problem of the marks has come about gradually, becoming slowly more evident.

How to keep porcelain tiles clean

Once you have removed the stains from the tiles, it is important to use the right product for ordinary maintenance, to prevent the problem recurring. For this, we recommend CLEANER PRO: a neutral detergent that leaves no residues on the surface, preventing the formation of marks. CLEANER PRO: can be used on any surface and a little goes a very long way! Just one 1-litre bottle is enough for up to 40 washes.

Read here how to clean any kind of floor with FILACLEANER

Facebook
Twitter
LinkedIn
Pinterest
WhatsApp

Subscribe to the newsletter

and stay up-to-date on all FILA news

Popular Articles

21 Comments

Comment this article

21 Replies to “How should porcelain tiles be cleaned? Stains and marks on porcelain tiles? Answers to all your questions”

  1. Hi, we have a porcelain tile flooring, every time something is dropped on the floor such pop drink’s or even if the dog has an accident wee they tend to leave a cloud stain, no matter how much we clean the floor the stains always return. Your surface cleaners come recommend but as you have a wide range I am a little confused as to which is the best to use. I await your response,
    Many thanks, M. Baker

  2. Dear Fila, we have had some wood affect porcelain tiles fitted on the patio at the rear of our house and the builders cement and residue is still showing. We’ve tried your Deterdek Pro end of build solution and it’s still looks hazy and grout looks lighter. Can you advise how to proceed and/or is there a product that will make them look shiny/ wet ? Perhaps a sealer or does it have to be completely haze free first ?

    1. Hi Oliver, our technical support has contacted you via email to help you find the best treatment.
      Kind Regards
      Laura

    Having read the Information Notice on the processing of data:
    • To receive marketing activities

    • To profiling activities

    By clicking send button, I confirm that I request the service indicated in point a) of these guidelines; my consent to the processing of data for the purposes of the service, including the processing methods mentioned in these guidelines, including possible processing carried out in EU member states or non-EU countries.

    Related articles

    Previous
    Next

    Fila Industria Chimica Spa

    Paid-in Capital: 35018

    Registered Office: VIA GARIBALDI, 58
    Administrative Office: Via Garibaldi, 58 – 35018 San Martino di Lupari (PD) – Italy
    Rea: PD-45734

    Company Profile PD 45734