{"id":4833,"date":"2015-06-23T08:17:36","date_gmt":"2015-06-23T07:17:36","guid":{"rendered":"http:\/\/www.filasolutionsblog.com\/?p=4833"},"modified":"2021-07-28T18:38:30","modified_gmt":"2021-07-28T16:38:30","slug":"protecting-new-stone-patios-from-bbq-spillages","status":"publish","type":"post","link":"https:\/\/blog.filasolutions.com\/en\/protecting-new-stone-patios-from-bbq-spillages\/","title":{"rendered":"Protecting new stone patios from BBQ spillages"},"content":{"rendered":"

As outdoor dining and entertaining becomes more popular, so too do associated surface issues.  One of the most common problems is unsightly stains<\/strong> caused by spitting fat <\/strong>and grease <\/strong>in BBQ areas<\/strong>.   It\u2019s a problem in both domestic and hotel\/pub environments but it can be easily avoided if you apply a suitable barrier treatment.<\/p>\n

When you\u2019re choosing a barrier, look out for an enhancing\/wet-effect treatment<\/strong> \u2013 like FILAWET<\/a><\/strong> – which will allow you to wipe spillages straight off the surface.  It will also enhance the stone\u2019s natural tone. If you don\u2019t want to change the aesthetic of the whole patio, just apply the treatment in the BBQ area\/s.<\/p>\n

\"barbeque1\"<\/a><\/p>\n

It\u2019s vital<\/strong> that any solvent-based treatment, like FILAWET, is applied during dry weather<\/strong>, so check that no rain is forecast for 24 hours.<\/p>\n

FILAWET<\/strong> should be applied to a clean, dry surface.  Use a brush and apply in one even, continuous coat.  After 24 hours, repeat the treatment.  For very absorbent materials, you may need a third coat.  Whilst the treatment is drying, don\u2019t walk on the surface and keep it free from foot traffic for 24 hours after the last application.  Re-application<\/strong> is then recommended every couple of years<\/strong>.<\/p>\n

For more advice and see how FILAWET<\/strong> is applied visit FILAWET – product information <\/a>or see the video here:<\/p>\n