app-storearea-applicatoriarea-privatiarea-produttoriarea-progettistiarea-rivenditoriarrow-downarrow-rightbackbookcalculatorclosecontrolsdownloademailenvelopeeyefilterflaggoogle-playlinklogo-fila-footerlogo-filalogo-recommendedmarkermateriali-esternomateriali-finituramateriali-internomateriali-lavaggiomateriali-manutenzionemateriali-pavimentomateriali-pretrattamentomateriali-protezionemateriali-rivestimentonewsletter-arrownewsletterpagenav-gridpagenav-nextpagenav-prevphone-filledphoneplayplusprintsearchshare-facebookshare-googleplusshare-linkedinshare-twittershareslider-arrow-leftslider-arrow-rightsocial-facebooksocial-flickr-bnsocial-flickrsocial-instagramsocial-linkedinsocial-pinterestsocial-twittersocial-youtubetoolbar-apptoolbar-capitolatotoolbar-certificationstoolbar-downloadtoolbar-eyedroppertoolbar-product-safetytoolbar-product-sheettoolbar-product-techtoolbar-retailertoolbar-supporttoolbar-videotutorialupload-file
How to...

How to quickly remove residues of silicone and glue from surfaces

Silicone is one of the most commonly used products by those who enjoy making small home repairs, but removing it effectively is often a difficult task. Silicone can in fact form very resistant stains and rings, as also occurs quite often with glue and sticky tape.

FilaZEROSIL

So do we have to give up on all the odd jobs at home because of a fear of silicone stains? Certainly not, just use FILAZERO SIL, FILA’s silicone remover: thanks to the specific formulation of FILAZERO SIL, silicone stains will no longer be a problem!

Its viscose consistency allows the product to act directly on the residue to be removed, preventing waste. FILAZERO SIL is the ideal product for marble and stone surfaces, for grouting and other absorbent materials.

Let’s look how to use it!

In the case of particularly larger residues, firstly remove as much residue as possible using a suitable sharp tool (e.g. box cutter, knife, blade) being careful not to damage the surface, then shake the bottle well and apply the pure product so as to completely cover every silicone residue. Wait about 20 minutes, then use the spatula provided in the kit to detach the dissolved residues and gather them up with a cloth or absorbent paper.

FilaZEROSIL_1Fila_ZEROSIL_2FilaZEROSIL_3FilaZEROSIL_4

In just a few simple moves, the surface is clean!

Remember! FILAZERO SIL is also effective for removing residues of glue, sticky tapewax and resin.

FilaZEROSIL_cera

Tags: glassmarblemetalnatural stoneporcelain tilesresidues of adhesive taperesidues of glueresidues of old labelsresidues of polyurethane foamresidues of silicone

20 Replies to “How to quickly remove residues of silicone and glue from surfaces”

  1. Same issue here as many. Due to the use of cement and sharp sand to lay the tiles, some stains are really stubborn to remove. Tried brick and patio cleaner and nothing worked. Even jet spray using my powerful Karcher. Help!

    1. Hi Dharmesh Patel, our technical support has contacted you via email to help you find the best treatment.
      Kind Regards
      Laura

  2. Hi..I’ve got the same problem with cement residue adhesive on my porcelin tiles your recommendation would be appreciated thank you

    1. Hi Michael, our technical support has contacted you via email to help you find the best treatment.
      Kind Regards
      Laura

  3. I wish to remove dry cement leftover after laying MSI paving stones , regular non ph floor cleaning and power wash is not working…also where can i send some picutures

    1. Hi Suresh, our technical support has contacted you via email to help you find the best treatment.
      Kind Regards
      Laura

  4. Hi – I have recently had some porcelain paving laid – these were laid on a bed of sand and cement and coated with unbind adhesive – they were then grouted (with waterproof grout). Whilst the builder hosed down the tiles after laying – there are some spots on the surface that are proving difficult to remove – I have used brick acid on the grout, which has broken down and scrubbed off – the bedding/unibond spots are the ones causing problems.

    Any advice on how to tackle these would be appreciated

    Dave

    1. Good afternoon Dave,
      we suggest a cleaning after laying with DETERDEK PRO, in order to remove the cement grout residues and any ather inorganic dirt typical of the job site.
      We remain at your disposal for any further information you may need.

      Best Regards,
      Chiara

  5. Hi,

    I am in the same boat as most of the people above. I have had newly laid porcelain tiles laid in my garden and there are areas which has cement residue and slurry bonding agent still on. I have tried using a jet wash on them and didnt have any joy. Could you help with this please?

    Thanks,

    James

    1. Hi James, our technical support has contacted you via email to help you find the best treatment.
      Regards
      Laura

Leave a Reply to Lila Ludbrook Cancel reply

Your email address will not be published. Required fields are marked *