Silicone is one of the most commonly used products by those who enjoy making small home repairs, but removing it effectively is often a difficult task. Silicone can in fact form very resistant stains and rings, as also occurs quite often with glue and sticky tape.
So do we have to give up on all the odd jobs at home because of a fear of silicone stains? Certainly not, just use ZEROSIL, FILA’s silicone remover: thanks to the specific formulation of ZEROSIL, silicone stains will no longer be a problem!
Its viscose consistency allows the product to act directly on the residue to be removed, preventing waste. ZEROSIL is the ideal product for marble and stone surfaces, for grouting and other absorbent materials.
Let’s look how to use it!
In the case of particularly larger residues, firstly remove as much residue as possible using a suitable sharp tool (e.g. box cutter, knife, blade) being careful not to damage the surface, then shake the bottle well and apply the pure product so as to completely cover every silicone residue. Wait about 20 minutes, then use the spatula provided in the kit to detach the dissolved residues and gather them up with a cloth or absorbent paper.
In just a few simple moves, the surface is clean!
Remember! ZEROSIL is also effective for removing residues of glue, sticky tape, wax and resin.
34 Replies to “How to quickly remove residues of silicone and glue from surfaces”
I just had porcelain slab tiles installed on my patio and the tiler left primer foot marks on the tiles. What can I use to remove the primer?
Hi Daniel A., our technical support has contacted you via email to help you find the best treatment.
Kind Regards
Jennifer
We have a new porcelain tiled floor on the whole of downstairs (150m2) which is grouted with epoxy grout. There is a hazy residue in large areas of floor. Can you please advise how to clean this.
Thank you. Sally
Hi Sally K., our technical support has contacted you via email to help you find the best treatment.
Kind Regards
Jennifer