How to clean resins from garden paving stones and other stone floor surfaces

Resina Sul Pavimento

With the arrival of summer, trees begin to produce natural resins which may then fall onto your garden paving stones, driveway, or on the natural stone surface of your decking. The resins then stick to your shoes and can leave unsightly difficult to remove marks on the flooring in your home.

clean natural stone

Until a few years ago, cleaning natural stone to remove the annoying stains left by tree resins was just about impossible. Indeed, removing resins from natural stone floor surfaces has always been a very tough task. At best, the resin stains would remain or in the worst cases, attempting to remove the resins would make the situation much worse and the stain could even spread to an even larger area. Today though, thanks to surface treatment specialist, FILA, removing resins from paving and other natural stone surfaces is no longer a seemingly insurmountable task: simply use these two Fila products: FILASOLV and FILAPS87.

FILASOLV wax remover is a solvent for removing waxes that you can safely use on natural stone, and a range of other surfaces such as terracotta, stoneware, wood, and even marble.

FILAPS87, on the other hand, is a detergent and wax stain remover remover which is fine for terracotta, stoneware, glazed ceramics, marble, unpolished stones, and even concrete, linoleum, PVC and clinker.

To remove natural resins from your natural stone floors start by wetting the surface and then pouring undiluted FILASOLV or FILAPS87 (diluted – one part FILAPS87 to three parts water) on the surface that needs cleaning. Then rub vigorously with a good quality abrasive sponge. Once you have finished cleaning, you simply rinse off the areas on which you used FILA products and you’re done.

If you have removed resins from the interior stone floor surface, once you’ve finished cleaning, we recommend you reapply a suitable protective surface treatment.

Facebook
Twitter
LinkedIn
Pinterest
WhatsApp

Subscribe to the newsletter

and stay up-to-date on all FILA news

Popular Articles

7 Comments

Comment this article

7 Replies to “How to clean resins from garden paving stones and other stone floor surfaces”

  1. Hi, we have an issue with our new granite paving outside, our builder has used joint it simple, we don’t think he has wet the surface enough, and the resin has stained the tops of the flags. Would these products be useful to remove the stains?

    1. Good morning Natalie.
      If we have well understood that the issue is how to remove resin residues from an external granite floor, we can suggest to use FILASOLV helpful to remove resin stains from natural stone.

      ATTENTION: Clicking on the name of the above mentioned product(s) you will be automatically redirected to the product page. We invite you to read it carefully. There you will find all the instructions relative to the product application, the Technical Data Sheet and the Safety data Sheet in order to use it correctly and obtain the best results.

      In order to find the nearest retailer click on https://www.filasolutions.com/eng/resellers

    1. To remove resin from natural stone in general we suggest to use use FILASOLV.
      No dilution required:
      product ready to use.
      Application:
      Wet a cloth thoroughly with FILA
      SOLV
      and clean the surface, taking care not to re-apply the removed wax residues or
      water-repellent product. In very stubborn cases, pour FILASOLV directly onto the surface, spread and leave for a few minutes,
      then scrub hard with a large brush. We recommend working on one small area at a time, gathering the dissolved dirt in a cloth

      ATTENTION: Clicking on the name of the above mentioned product(s) you will be automatically redirected to the product page. We invite you to read it carefully. There you will find all the instructions relative to the product application, the Technical Data Sheet and the Safety data Sheet in order to use it correctly and obtain the best results.

      In order to find the nearest retailer click on https://www.filasolutions.com/eng/resellers

  2. Last year I had this problem with the trees in my backyard. I couldn’t clean these so called resins. They are like a glue! Thank you for the useful article! This year I will try your method!

  3. I have already used this product and it is magical. I have a few trees in my garden, and the resin which fell down from them ruined my beautiful garden tiles. A friend of mine told me about Filasolv and I decided to try it. A miracle happened! There were not even a sign from the stains.

    Having read the Information Notice on the processing of data:
    • To receive marketing activities

    • To profiling activities

    By clicking send button, I confirm that I request the service indicated in point a) of these guidelines; my consent to the processing of data for the purposes of the service, including the processing methods mentioned in these guidelines, including possible processing carried out in EU member states or non-EU countries.

    Related articles

    Previous
    Next

    Fila Industria Chimica Spa

    Paid-in Capital: 35018

    Registered Office: VIA GARIBALDI, 58
    Administrative Office: Via Garibaldi, 58 – 35018 San Martino di Lupari (PD) – Italy
    Rea: PD-45734

    Company Profile PD 45734