Cleaning any kind of floor with just one product is possible, thanks to FILACLEANER neutral detergent, ideal for marble, porcelain tiles, parquet, terracotta…
Ordinary maintenance of floors is often a nightmare, especially for those who have different surfaces in the home. Each material in fact has its own characteristics that normal detergents are unable to clean effectively.
How to clean any surface and finish with just one product
Thanks to its neutral formula, FILACLEANER gives perfectly clean results even on the most delicate or treated surfaces, such as lappato porcelain tiles, polished or brushed marble, prefinished parquet or crackle-glazed ceramic tiles. It is also ideal on waxed surfaces such as encaustic cement tiles, terracotta and natural stone. With just one product, therefore, you can clean any floor or surface in your home.
Here you will find the technical info sheet and safety sheet for the product
Advantages: high yield, great savings and perfectly clean surfaces
What makes FILACLEANER different from a normal detergent on the market?
- FILACLEANER is a concentrated detergent that can be used in various dilutions depending on the dirt to be removed. For ordinary maintenance, just one drop is enough: just 25 ml in a 5-litre bucket of water. A litre of product therefore goes a very long way and as a consequence also means big savings:
Average maintenance cost €0.01/m²
– Just 1 litre of product is enough for 50 washes and/or for cleaning up to 500 m².
– 1 litre of product lasts up to a year.
values estimated by FILA on a surface of 150 m² washed once a week (diluted 1:200).
- When used diluted for ordinary maintenance, FILACLEANER does not need rinsing and does not leave any residues. Normal detergents, on the other hand, often contain shine additives that deposit on the floor and over time form unsightly streaks and marks or, even worse, make the surface slightly sticky, therefore attracting dirt even more easily.
How to use: simple advice for better cleaning
- Dilute 25 ml of product in a 5-litre bucket of hot water
- Rinse the cloth or mop out frequently in the washing solution and wring out well before wiping over the floor
- Clean small sections of the floor at a time, wiping each one twice to ensure a perfectly clean surface.
- Change the washing solution for a fresh one every 50 m² or so
Particularly dirty floors? FILACLEANER cleans them as well!
Have we already said the FILACLEANER is concentrated? Well, this means that it can also be used to clean really dirty floors. In this case, just use a more concentrated dilution: 1:30 or 1:50 and rinse afterwards with clean water.
Guaranteed efficacy: the product most recommended by manufacturers of porcelain tiles and stone!
FILACLEANER is the detergent recommended by over 200 manufacturers of porcelain and ceramic tiles and stone, who endorse it in their catalogues for maintenance of their products.
But that’s not all! ASSOPOSA, the Italian association of companies of layers and installers of ceramic tiles, recommends FILACLEANER and the other FILA detergents because they are effective and respect both materials and grouting.
ADVICE FROM THE EXPERT: A FEW TIPS FOR CLEANING THE HOME
1. First of all, good initial washing
Thorough initial washing means floors stay beautiful and protected at length. Fila has fine-tuned a line of specific products that remove grout, residues of plaster, building site dirt, etc.
2. Do not use alcohol or ammonia.
Alcohol and ammonia harm surfaces, treatments and finishing waxes, altering their natural beauty. Never use them, not even on stains, which can be removed with Fila products.
3. It is better to use warm water.
Fila products give optimum cleaning results. But they become unbeatable with the addition of a little warm water: when you dilute the detergents, their efficacy actually increases. Keep this in mind and the result will be surprising.
4. No steam, thank you.
Fila advises against using steam machines on all wooden floors and on waxed floors. Fila products allow you to clean just as quickly, but much more satisfactorily and without harming the materials.
17 Replies to “How to Clean any Kind of Floor With Just 1 Product: FILACLEANER”
Im interested in buying FILA cleaner for my tiles simil Wood but I want to know how much should I dilute if I just want to use a smalller quantity of water. I bought the PROMIST MAX MICRO FIBER SPRAY mop that comes with a refillable bottle of 750ml.
And after using the Pad can I put it in the washing machine or the lefts of FIla Cleaner that might be in the pad can harm the machine?
THanks
Victoria
Good morning Victoria,
FILACLEANER can be used with washing machines.
The correct dilution for washing machines is 1:200 (1 part of product in 200 parts of water, i.e. 25 ml in 5 Lt. of water).
In your case in 750 ml of water you have to add 3,75 ml of FILACLEANER.
We remain at your disposal for any further information you may need.
Best Regards,
Chiara
Hi, I have crackle effect tiles and unfortunately have splash stains all over them which may have been caused by a detergent or bleach used by my cleaner. Please can you advise what the best way to remove this is without causing harm or any further staining to the tiles please?
Good morning Caroline,
Unfortunately bleach or alkaline or acidic detergents can cause irremediable issues on crackle ceramics, that cannot be restored.
We suggest you, in order to avoid the worsening of the situation to clean the surface with neutral detergents, like FILACLEANER diluted 1:200.
We generally suggest also a protection with FILAMP90.
We remain at your disposal for any further information you may need.
Best Regards,
Chiara
Nice job. This tip about a product useful for cleaning floor for a minimum penny to spend at. This is realy a helpful tip to save money.
Good morning Kalia and thank you for your comment.
I have porcelain tiles in my house. Unfortunately, ammonia cleaner was left on the floor and the tiles now have lighter streaks. How do I clean this?
Probably the ammonia cleaner has deeply cleaned the surface of your porcelain tiles that during the time could have formed a superficial film due to dirt and inappropriate detergents leaving some greasy residues on the surface.
In these cases we suggest to do an extraordinary washing using the degreasing, stain removing detergentFILAPS87.
Application:
Dilute FILAPS87 in water (1:5, i.e. 1 liter of product in 5 lt of water) and apply to the surface.
Leave to act for 4-5 minutes before brushing with a large brush.
Use a cloth or “aqua vac” to remove washing residues and then rinse thoroughly.
For ordinary maintenance:
Dilute FILACLEANER, at 1:200 (25 ml in 5 litres of water). With this dilution the product does not need to be rinsed.
ATTENTION: Clicking on the name of the above mentioned product/s you will be automatically redirected to the product page. We invite you to read it carefully. There you will find all the instructions relative to the product application, the Technical Data Sheet and the Safety data Sheet in order to use it correctly and obtain the best results.
In order to find the nearest retailer click on https://www.filasolutions.com/eng/resellers
I have just had Matt gres floor tiles installed and the tiler made a big mess with the cement and grouting. The tiles are a dark grey. I have tried to wash them with white vinegar and bacarbonite of soda , I just did a few times and they look better but I am not convinced that all the dirt is gone. Can I purchase Filacleaner please? I am desperate. I live in Malta and nobody seems to know about the right way to clean after installing tiles. No products are available. Please help.
Hi Dolores, The right product for after installation cleaning is DETERDEK. Here is our store locator: http://www.filasolutions.com