Tumbled marble has a really distinct look – a sophisticated feel without the sharp edges – but it does need to be treated with care.
Step 1 – Sealing Tumbled Marble
Tumbled marble should be sealed after installation with a sealer formulated specifically for stone to maximize protection against dirt, dust and debris becoming trapped in the pits.
There are two types of sealers for tumbled marble: penetrating sealer, which will not alter the color like FILAFOB or FILAMP90 ECO PLUS, and color-enhancing sealer like FILASTONE PLUS or FILAPT10, which will deepen the color of the tile. Testing a sample tile before applying the sealer to the entire tiled surface is recommended.
Applying the sealer is easy; brush, roll or wipe it on the entire surface following the instructions on the product label.
Step 2 – Cleaning Tumbled Marble
Marble is porous and it’s alkaline-based, so it’s sensitive to acid. Steer clear of acid-based cleaners, like lemon and vinegar, or anything that contains alcohol, as it will break down the surface. Instead, use a gentle non-abrasive pH-neutral cleaner.
For best results, we recommend FILACLEANER.
1. Just dilute – 1:200 – using clean, luke warm water. Mop the surface and leave to dry; no rinsing’s required!
2. For very dirty floors, increase the dilution to 1:30 to 1:50. Wipe the floor after the initial mop to remove any residue and then rinse with clean water.
To help make maintenance easier – and to protect the surface – consider a finishing treatment, like FILACLASSIC liquid wax. You just apply it with a damp cloth, leave it to dry for 30 minutes and then polish the surface.
Tips and Warnings:
Although vinegar has been recommended as an effective cleaner against stains, never use it on marble or on natural stone since its acidic qualities will damage the stone.
If you need more advice, just contact our UK Help Line on tel. tel. 01584 877286 or visit www.filasolutions.com
13 Replies to “How to Clean and Care for Tumbled Marble Tile”
A well-informative article about cleaning marble tile.
Cleaning Tips! Carbon filters should be replaced when they are noticeably dirty or discolored (usually every 6 to 12 months, depending on usage).
Nice tip! Cleaning should be a must for anything. Thanks for sharing that here so others can read it too.Wonderful Blog.Proper cleaning and maintenance is also something which is very necessary. This blog seems extremely informative and helpful. Glad you found this post useful. This article is also very good.Thanks for sharing this good information.
tile cleaning products
All tips are nice and good.This is some amazing Content and for providing very detailed information about cleaning the marble tiles.I really like your blog. Thanks for writing this awesome article. I’m a long time reader but I’ve never been compelled to leave a comment. Brilliant job Thank you.
Nice tip! Cleaning should be a must for anything. Thanks for sharing that here so others can read it too. This is some amazing Content and for providing very detailed information about cleaning the marble tiles. I am very happy about your blog it’s very helpful for everyone.
General Janitorial Winston Salem